EMX VMD-202-50 Exit Device With 50ft Lead Wire
EMX CAR EXIT DETECTION MODEL VMD202-50
Program the VMD202 vehicle motion detector’s 10 sensitivity settings with the VMD202-R Sensitivity Remote Control. Simply plug the VMD202-R into the harness to tune the VMD202. The setting is retained in non-volatile memory. The VMD-R can be removed and used for multiple installations, or left in place if tampering is not a concern.
The VMD202 vehicle motion detector accepts a wide range of power inputs. If used in a location without power, one 9V battery will power the VMD202 for six months. The low standby current of 250uA is great for solar power applications.
- Probe assembly and wire are water tight and direct burial compatible
- Harness is pre-wired onto lead wire for easy installation
- Settings are placed in a non-volatile memory in case of power failure
- Accepts wide range of power inputs from 9 – 41 VDC or 6 – 29 VAC
- Low current consumption of 250uA standby and 12mA activated
General Description: The CarSense 202 Driveway Alert Sensor is based on the well known CarSense 101 design. It has single piece design, making installation easy. The CarSense 202 is suitable for many applications, including safety, security access control, and solar applications.
- 1 sensor tube with 50ft lead wire length
- Remote not included