Miller Edge MGR20 Round Frame Edge Sensor

Miller Edge Round Frame Edge Sensor Model No. MGR20 (xxx) 

MillerEdge MGR20 sensor directly mounted onto round gate frames. Below is the breakdown:

General Description: A sensing edge is a touch sensitive switch that sends a signal to start, stop or reverse a motor or even to ring a bell. Since they typically operate on 24 volts, the possibilities for applications are endless.

The MGR20 were designed to minimize installation time while offering customers the three sided protection for the leading edge of the gate. These edge sensors simply clip on to the 2” frame. The rigid base extends beyond the sensitized portion of the edge sensor to form mounting flanges. To mount, drill 1/8” holes through the mounting flanges and into the gate frame every 24 inches. Permanently attach with #10 screws. Run wire to the gate operator and attach to safety reverse terminals per the gate operator installation manual. Test the edge sensor and inform the property owner of their obligation to regularly test. When properly maintained, MGR20 offer years of trouble free service

Electrical Requirements: 24 volt AC or DC,1/2 amp

Technology:

• Color: Black
• Length: 4, 5 and 6 feet (select in dropdown)
• UL 325 10k (select in dropdown)
• Sensitivity: 6-8 psi - standard
• 2 ft. SJTO 18 gauge - standard
• 2 wire N.O. configuration
• Contact Element Alumaglas
• 24 volt AC/DC 1/2 amp
• Sensing Edge: Extruded flexible PVC
• Temperature Range: -30o F to + 155oF

• 1 sensing edge

• Specification Sheet
• Installation / User Manual