Multicode 109950 Gate Receiver (12-24V)

Linear MultiCode Receiver Model No. 109950

Multicode 1099 300 & 310 MHz coax radio receiver. Support transmitters that use the Multi-Code format (300 MHz ), as well as the Stanley compatible (310 MHz ) format. Both formats support 1,024 system codes.

The Model 109950 1-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver’s Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver.

The Model 109950 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.

The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator’s radio activation terminals.

The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver’s output will activate, triggering the gate operator. 

Specifications:

• Compatible with 300 and 310 MHz Multi-Code and Stanley transmitters
• Operates on 12-30 VAC power
• One channel
• Whip antenna
• Codes: 1,024 set by 10 dip switches
• RF frequency: 300 MHz or 310 MHz
• Dimensions: 3.625" W x 5.25" H x 1.5" D
• Aka: Multi-Elmac 1099-50 / MCS109950 / Stanley 1099-50

• 1 receiver
• 1 F-connector antenna

• Download Cut Sheet
• Download Manual