Transmitter Solutions Hive HIVE318GDO Gate and Garage Receiver (318Mhz)

Hive Gate and Garage Receiver Model No. HIVE318GDO 

This receiver can mount directly to the operator. It can also be remotely installed if the operator terminal strip is not easily accessible or if power for the receiver is unavailable from the operator. To directly mount the receiver, loosen the terminal screws, insert the lugs on the receiver under the screw heads with the wall button wires, and then tighten the screws.

For remote installation, mount the receiver near the operator and connect the receiver to the operator terminals using connecting wires. Insert the lugs under the screw heads on the operator as above, and slip the connectors at the other end of the adapter wire to the flat side of each lug on the receiver

• 1 channel
• Charcoal
• With coax antenna and wiring harness
• 12-24 VDC/AC
• Compatible with Allstar® dip switch and classic transmitters

Download Information:

• Specification Sheet
• Installation / User Manual